Inhibition of cysteine protease cathepsin Lincreases the level and activity of lysosomal glucocerebrosidase.

The glucocerebrosidase (GCase) encoded by the GBA1 gene hydrolyzes glucosylceramide (GluCer) to ceramide and glucose in lysosomes. Homozygous or compound heterozygous GBA1 mutations cause the lysosomal storage disease Gaucher disease (GD) due to severe loss of GCase activity. Loss-of-function variants in the GBA1 gene are also the most common genetic risk factor for Parkinson's disease (PD) and dementia with Lewy bodies (DLB). Restoring lysosomal GCase activity represents an important therapeutic approach for GBA1-associated diseases. We hypothesized that increasing the stability of lysosomal GCase protein could correct deficient GCase activity in these conditions. However, it remains unknown how GCase stability is regulated in the lysosome. We found that cathepsin L, a lysosomal cysteine protease, cleaves GCase and regulates its stability. In support of these data, GCase protein was elevated in the brain of cathepsin L-KO mice. Chemical inhibition of cathepsin L increased both GCase levels and activity in fibroblasts from patients with GD. Importantly, inhibition of cathepsin L in dopaminergic neurons from a patient GBA1-PD led to increased GCase levels and activity as well as reduced phosphorylated α-synuclein. These results suggest that targeting cathepsin L-mediated GCase degradation represents a potential therapeutic strategy for GCase deficiency in PD and related disorders that exhibit decreased GCase activity.

Growth methodologies of boron nitride nanotubes and their neutron shielding applications: a review.

This review provides a comprehensive overview of the growth methodologies and neutron shielding applications of Boron Nitride Nanotubes (BNNTs). BNNTs have garnered significant attention because of their unique combination of high thermal stability, mechanical strength, and exceptional neutron absorption properties. Synthesis methods for BNNTs, including laser ablation, thermal plasma treatment, chemical vapour deposition (CVD), and ball milling have been thoroughly examined, highlighting their mechanisms, advantages, and challenges. Each method contributes uniquely to the quality and applicability of BNNTs in terms of scalability and production efficiency. This study focused on the applications of BNNTs in neutron absorption, particularly in aerospace engineering. BNNTs have shown promising potential in enhancing the safety and longevity of space missions by providing effective radiation protection. Furthermore, their potential in medical applications, particularly in Boron Neutron Capture Therapy (BNCT) for cancer treatment, has been explored. BNCT offers a targeted approach to cancer therapy by utilizing the high boron-10 content of BNNTs for precise and localized treatment. This review also provides an outlook on the future of BNNT research, emphasizing the need for more efficient growth methods to facilitate wider adoption and commercialization. The versatility of BNNTs across various fields, from space exploration to medical science, underscores their potential as materials of significant scientific and technological importance. As research progresses, BNNTs are expected to play a pivotal role in advancing materials science and offer innovative solutions to complex challenges.

An Amiable Design of Cobalt Single Atoms as the Active Sites for Oxygen Evolution Reaction in Desalinated Seawater.

Green fuel from water splitting is hardcore for future generations, and the limited source of fresh water (<1%) is a bottleneck. Seawater cannot be used directly as a feedstock in current electrolyzer techniques. Until now single atom catalysts were reported by many synthetic strategies using notorious chemicals and harsh conditions. A cobalt single-atom (CoSA) intruding cobalt oxide ultrasmall nanoparticle (Co3 O4 USNP)-intercalated porous carbon (PC) (CoSA-Co3 O4 @PC) electrocatalyst was synthesized from the waste orange peel as a single feedstock (solvent/template). The extended X-ray absorption fine structure spectroscopy (EXAFS) and theoretical fitting reveal a clear picture of the coordination environment of the CoSA sites (CoSA-Co3 O4 and CoSA-N4 in PC). To impede the direct seawater corrosion and chlorine evolution the seawater has been desalinated (Dseawater) with minimal cost and the obtained PC is used as an adsorbent in this process. CoSA-Co3 O4 @PC shows high oxygen evolution reaction (OER) activity in transitional metal impurity-free (TMIF) 1 M KOH and alkaline Dseawater. CoSA-Co3 O4 @PC exhibits mass activity that is 15 times higher than the commercial RuO2 . Theoretical interpretations suggest that the optimized CoSA sites in Co3 O4 USNPs reduce the energy barrier for alkaline water dissociation and simultaneously trigger an excellent OER followed by an adsorbate evolution mechanism (AEM).

Synthesis of Double-Walled Boron Nitride Nanotubes from Ammonia Borane by Thermal Plasma Methods.

Highly crystalline double-walled boron nitride nanotubes (DWBNNTs ∼60%) were synthesized from ammonia borane (AB; H3B-NH3) precursors using a high-temperature thermal plasma method. The differences between the synthesized BNNTs using the hexagonal boron nitride (h-BN) precursor and AB precursor were compared using various techniques such as thermogravimetric analysis, X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and in situ optical emission spectroscopy (OES). The synthesized BNNTs were longer and had fewer walls when the AB precursor was used than when the conventional method was used (with the h-BN precursor). The production rate significantly improved from ∼20 g/h (h-BN precursor) to ∼50 g/h (AB precursor), and the content of amorphous boron impurities was significantly reduced, implying a self-assembly mechanism of BN radicals rather than the conventional mechanism involving boron nanoballs. Through this mechanism, the BNNT growth, which was accompanied by an increased length, a decreased diameter, and a high growth rate, could be understood. The findings were also supported by in situ OES data. Considering the increased production yield, this synthesis method using AB precursors is expected to make an innovative contribution to the commercialization of BNNTs.

Lyotropic Boron Nitride Nanotube Liquid Crystals: Preparation, Characterization, and Wet-Spinning for Fabrication of Composite Fiber.

Microfiber fabrication via wet-spinning of lyotropic liquid crystals (LCs) with anisotropic nanomaterials has gained increased attention due to the microfibers' excellent physical/chemical properties originating from the unidirectional alignment of anisotropic nanomaterials along the fiber axis with high packing density. For wet-spinning of the microfibers, however, preparing lyotropic LCs by achieving high colloidal stability of anisotropic nanomaterials, even at high concentrations, has been a critically unmet prerequisite, especially for recently emerging nanomaterials. Here, we propose a cationically charged polymeric stabilizer that can efficiently be adsorbed on the surface of boron nitride nanotubes (BNNTs), which provide steric hindrance in combination with Coulombic repulsion leading to high colloidal stability of BNNTs up to 22 wt %. The BNNT LCs prepared from the dispersions with various stabilizers were systematically compared using optical and rheological analysis to optimize the phase behavior and rheological properties for wet-spinning of the BNNT LCs. Systematic optical and mechanical characterizations of the BNNT microfibers with aligned BNNTs along the fiber axis revealed that properties of the microfibers, such as their tensile strength, packing density, and degree of BNNT alignment, were highly dependent on the quality of BNNT LCs directly related to the types of stabilizers.

Brain-specific deletion of GIT1 impairs cognition and alters phosphorylation of synaptic protein networks implicated in schizophrenia susceptibility.

Despite tremendous effort, the molecular and cellular basis of cognitive deficits in schizophrenia remain poorly understood. Recent progress in elucidating the genetic architecture of schizophrenia has highlighted the association of multiple loci and rare variants that may impact susceptibility. One key example, given their potential etiopathogenic and therapeutic relevance, is a set of genes that encode proteins that regulate excitatory glutamatergic synapses in brain. A critical next step is to delineate specifically how such genetic variation impacts synaptic plasticity and to determine if and how the encoded proteins interact biochemically with one another to control cognitive function in a convergent manner. Towards this goal, here we study the roles of GPCR-kinase interacting protein 1 (GIT1), a synaptic scaffolding and signaling protein with damaging coding variants found in schizophrenia patients, as well as copy number variants found in patients with neurodevelopmental disorders. We generated conditional neural-selective GIT1 knockout mice and found that these mice have deficits in fear conditioning memory recall and spatial memory, as well as reduced cortical neuron dendritic spine density. Using global quantitative phospho-proteomics, we revealed that GIT1 deletion in brain perturbs specific networks of GIT1-interacting synaptic proteins. Importantly, several schizophrenia and neurodevelopmental disorder risk genes are present within these networks. We propose that GIT1 regulates the phosphorylation of a network of synaptic proteins and other critical regulators of neuroplasticity, and that perturbation of these networks may contribute specifically to cognitive deficits observed in schizophrenia and neurodevelopmental disorders.

Spontaneous formation of boron nitride nanotube fibers by boron impurity reduction in laser ablation of ammonia borane.

Highly crystalline and few-walled boron nitride nanotubes (BNNTs) had been synthesized by laser ablation using only ammonia borane as a precursor. As a molecular precursor, ammonia borane supplied both B and N atoms with a ratio of 1:1, and BNNTs were formed via the homogeneous nucleation of BN radicals, not the growth from boron nano-droplets, which is a generally accepted growth mechanism of the laser-grown BNNTs. Owing to the absence of amorphous boron impurities, the van der Waals interaction among BNNTs became effective and thus a BNNT fibers was formed spontaneously during the BNNT synthesis. The BNNT growth and the subsequent fiber formation are found to occur only at high pressures of a surrounding gas. The mechanism behind the critical role of pressure was elucidated from the perspective of reaction kinetics and thermal fluid behaviors. A polarized Raman study confirmed that the BNNT fiber formed exhibits a good alignment of BNNTs, which implies great potential for continuous production of high-quality BNNT fibers for various applications.

Lysosomal ceramides regulate cathepsin B-mediated processing of saposin C and glucocerebrosidase activity.

Variants in multiple lysosomal enzymes increase Parkinson's disease (PD) risk, including the genes encoding glucocerebrosidase (GCase), acid sphingomyelinase (ASMase) and galactosylceramidase. Each of these enzymes generates ceramide by hydrolysis of sphingolipids in lysosomes, but the role of this common pathway in PD pathogenesis has not yet been explored. Variations in GBA1, the gene encoding GCase, are the most common genetic risk factor for PD. The lysosomal enzyme cathepsin B has recently been implicated as an important genetic modifier of disease penetrance in individuals harboring GBA1 variants, suggesting a mechanistic link between these enzymes. Here, we found that ceramide activates cathepsin B, and identified a novel role for cathepsin B in mediating prosaposin cleavage to form saposin C, the lysosomal coactivator of GCase. Interestingly, this pathway was disrupted in Parkin-linked PD models, and upon treatment with inhibitor of ASMase which resulted in decreased ceramide production. Conversely, increasing ceramide production by inhibiting acid ceramidase activity was sufficient to upregulate cathepsin B- and saposin C-mediated activation of GCase. These results highlight a mechanistic link between ceramide and cathepsin B in regulating GCase activity and suggest that targeting lysosomal ceramide or cathepsin B represents an important therapeutic strategy for activating GCase in PD and related disorders.

Two-Dimensional Stacked Composites of Self-Assembled Alkane Layers and Graphene for Transparent Gas Barrier Films with Low Permeability.

Self-assembled alkane layers are introduced between graphene layers to physically block nanometer size defects in graphene and lateral gas pathways between graphene layers. A well-defined hexatriacontane (HTC) monolayer on graphene could cover nanometer-size defects because of the flexible nature and strong intermolecular van der Waals interactions of alkane, despite the roughness of graphene. In addition, HTC multilayers between graphene layers greatly improve their adhesion. This indicates that HTC multilayers between graphene layers can effectively block the lateral pathway between graphene layers by filling open space with close-packed self-assembled alkanes. By these mechanisms, alternately stacked composites of graphene and self-assembled alkane layers greatly increase the gas-barrier property to a water vapor transmission rate (WVTR) as low as 1.2 × 10-3 g/(m2 day), whereas stacked graphene layers generally show a WVTR < 0.5 g/(m2 day). Furthermore, the self-assembled alkane layers have superior crystallinity and wide bandgap, so they have little effect on the transmittance.

An environmentally benign synthesis of Fe3O4 nanoparticles to Fe3O4 nanoclusters: Rapid separation and removal of Hg(II) from an aqueous medium.

In the field of nanotechnology, nanoadsorbents have emerged as a powerful tool for the purification of contaminated aqueous environments. Among the variety of nanoadsorbents developed so far, magnetite (Fe3O4) nanoparticles have drawn particular interest because of their quick separation, low cost, flexibility, reproducibility, and environmentally benign nature. Herein, we describe a new strategy for the synthesis of Fe3O4 nanoclusters, which is based on the use of naturally available edible mushrooms (Pleurotus eryngii) and environmentally benign propylene glycol as a solvent medium. By tuning the temperature, we successfully convert Fe3O4 nanoparticles into Fe3O4 nanoclusters via hydrothermal treatment, as evidenced by transmission electron microscopy. The Fe3O4 nanoclusters are functionalized with an organic molecule linker (dihydrolipoic acid, DHLA) to remove hazardous Hg(II) ions selectively. Batch adsorption experiments demonstrate that Hg(II) ions are strongly adsorbed on the material surface, and X-ray photoelectron and Fourier transform infrared spectroscopy techniques reveal the Hg(II) removal mechanism. The DHLA@Fe3O4 nanoclusters show a high removal efficiency of 99.2 % with a maximum Hg(II) removal capacity of 140.84 mg g-1. A kinetic study shows that the adsorption equilibrium is rapidly reached within 60 min and follows a pseudo second-order kinetic model. The adsorption and separation system can be readily recycled using an external magnet when the separation occurs within 10 s. We have studied the effect of various factors on the adsorption process, including pH, concentration, dosage, and temperature. The newly synthesized superparamagnetic DHLA@Fe3O4 nanoclusters open a new path for further development of the medical, catalysis, and environmental fields.

Nanoscale layer of a minimized defect area of graphene and hexagonal boron nitride on copper for excellent anti-corrosion activity.

In this work, we synthesized a monolayer of graphene and hexagonal boron nitride (hBN) using chemical vapor deposition. The physicochemical and electrochemical properties of the materials were evaluated to determine their morphology. High-purity materials and their atomic-scale coating on copper (Cu) foil were employed to prevent fast degradation rate. The hexagonal two-dimensional (2D) atomic structures of the as-prepared materials were assessed to derive their best anti-corrosion behavior. The material prepared under optimized conditions included edge-defect-free graphene nanosheets (∼0.0034µm2) and hBN (∼0.0038µm2) per unit area of 1µm2. The coating of each material on the Cu surface significantly reduced the corrosion rate, which was âˆ¼2.44 × 10-2/year and 6.57 × 10-3/year for graphene/Cu and hBN/Cu, respectively. Importantly, the corrosion rate of Cu was approximately 3-fold lower after coating with hBN relative to that of graphene/Cu. This approach suggests that the surface coating of Cu using cost-effective, eco-friendly, and the most abundant materials in nature is of interest for developing marine anti-corrosion micro-electronic devices and achieving surface modification of pure metals in industrial applications.

Insight into BN Impurity Formation during Boron Nitride Nanotube Synthesis by High-Temperature Plasma.

The high-temperature plasma process has demonstrated great potential in growing high-quality boron nitride nanotubes (BNNTs) with small diameters (∼5 nm) and few walls (3-4 walls) and led to successful commercialization with a high production rate approaching 20 g/h. However, the process is still accompanied by the production of BN impurities (e.g., a-BN, BN shell, BN flakes) whose physicochemical properties are similar to those of BNNTs. This renders the post-purification process very challenging and thus hampers the development of their practical applications. In this study, we have employed both experimental and numerical approaches for a mechanistic understanding of BN impurity formation in the high-temperature plasma process. This study suggests that the flow structure of the plasma jet (e.g., laminar or turbulent) plays a key role in the formation of BN impurities by dictating the transport phenomena of BNNT seeds (e.g., B droplets), which play an important role in BNNT nucleation. We discussed that the turbulence enhances the radial diffusion of B droplets as well as their interparticle coagulation, which leads to a significant reduction in the population of effective BNNT seeds in the BNNT growth zone (T < 4000 K). This results in the generation of unreacted BN precursors (e.g., B-N-H species) in the BNNT growth zone that eventually self-assemble into BN impurities. Our numerical simulation also suggests that a higher thermal energy input makes the flow more turbulent in the BNNT growth zone due to the elevated velocity difference between the plasma jet and ambient cold gas. This finding provides critical insight into the process design that can suppress the BN impurity formation in the high-temperature plasma process.

Highly Selective Multiplex Quantitative Polymerase Chain Reaction with a Nanomaterial Composite Hydrogel for Precise Diagnosis of Viral Infection.

As viruses have been threatening global public health, fast diagnosis has been critical to effective disease management and control. Reverse-transcription quantitative polymerase chain reaction (RT-qPCR) is now widely used as the gold standard for detecting viruses. Although a multiplex assay is essential for identifying virus types and subtypes, the poor multiplicity of RT-qPCR makes it laborious and time-consuming. In this paper, we describe the development of a multiplex RT-qPCR platform with hydrogel microparticles acting as independent reactors in a single reaction. To build target-specific particles, target-specific primers and probes are integrated into the particles in the form of noncovalent composites with boron nitride nanotubes (BNNTs) and carbon nanotubes (CNTs). The thermal release characteristics of DNA, primer, and probe from the composites of primer-BNNT and probe-CNT allow primer and probe to be stored in particles during particle production and to be delivered into the reaction. In addition, BNNT did not absorb but preserved the fluorescent signal, while CNT protected the fluorophore of the probe from the free radicals present during particle production. Bicompartmental primer-incorporated network (bcPIN) particles were designed to harness the distinctive properties of two nanomaterials. The bcPIN particles showed a high RT-qPCR efficiency of over 90% and effective suppression of non-specific reactions. 16-plex RT-qPCR has been achieved simply by recruiting differently coded bcPIN particles for each target. As a proof of concept, multiplex one-step RT-qPCR was successfully demonstrated with a simple reaction protocol.

Effect of Integrated Cognitive Intervention Therapy in Patients with Mild to Moderate Alzheimer's Disease.

BACKGROUND AND PURPOSE: The effect of the integrated program comprising cognitive training, art therapy, and music therapy has not been extensively studied in patients with Alzheimer's disease (AD). The present study investigated the effect of integrated cognitive intervention therapy on cognition, and activity of daily life (ADL), and mood in patients with mild to moderate AD. METHODS: In this study, the data of 59 patients who met the National Institute of Neurological and Communicative Disorders and Stroke-Alzheimer disease and Related Disorders Association (NINCDS-ADRDS) criteria of probable AD among those who registered at the Centenarian's Good Memory Program in Goyang from September 2014 to August 2019 were collected. We statistically analyzed the scores of Korean version of a Mini-Mental Status Examination (K-MMSE), Korean Dementia Screening Questionnaire-Cognition (KDSQ-C), Geriatric Depression Scale (GDS), Beck Anxiety Inventory (BAI), and Seoul-Instrumental Activities of Daily Living (S-IADL) of the same patients before and after the use of integrated cognitive intervention therapy. RESULTS: K-MMSE slightly increased from 18.7±4.5 to 19.7±5.0 (p<0.001) and KDSQ-C improved from 14.5±7.6 before therapy to 12.6±7.2 after therapy (p=0.001). Mean S-IADL score improved from 17.6±7.6 before therapy to 15.7±9.5 after therapy (p<0.001). Additionally, mean GDS score before the therapy was 5.6±3.5 that improved to 4.2±3.0 after the therapy (p<0.001). Mean BAI score decreased from 8.4±10.3 before therapy to 5.9±8.4 after therapy (p=0.001). CONCLUSIONS: In conclusion, this study demonstrated the possibility that the use of an integrated cognitive therapy improved cognition, ADL, and mood (depression and anxiety) in patients with mild to moderate ADs.

Single- and double-walled boron nitride nanotubes: Controlled synthesis and application for water purification.

Research interest in boron nitride nanotubes (BNNTs) has increased after the recent success of large-scale BNNT syntheses using high-temperature-pressure laser ablation or high-temperature plasma methods. Nonetheless, there are limits to the application and commercialization of these materials because of the difficulties associated with their fine structural control. Herein, the growth kinetics of BNNTs were systemically studied for this purpose. The growth pressure of the nitrogen feed gas was varied while the growth temperature remained constant, which was confirmed by black body radiation measurements and calculations based on a heat loss model. Changing from the diffusion-limited regime to the supply-limited regime of growth kinetics based on the optimized BNNT synthesis condition afforded the control of the number of BNNT walls. The total amount of BNNTs possessing single and double walls was over 70%, and the BNNT surface area increased to 278.2 m2/g corresponding to small wall numbers and diameters. Taking advantage of the large surface area and high-temperature durability of the material, BNNTs utilized as a recyclable adsorbent for water purification. The efficiency of the BNNTs for capturing methylene blue particles in water was approximately 94%, even after three repetition cycles, showing the potential of the material for application in the filter industry.

Effect of Polymeric In Situ Stabilizers on Dispersion Homogeneity of Nanofillers and Thermal Conductivity Enhancement of Composites.

Boron nitride (BN) nanofiller-based polymer composites have been considered promising candidates for efficient heat-dissipating packaging materials because of their superior thermal conductivity, mechanical strength, and chemical resistance. However, strong aggregation of the BN nanofillers in the composite matrix as well as the difficulty in the modification of the chemically inert surface prevents their effective use in polymer composites. Herein, we report an effective method by using in situ stabilizers to achieve homogeneous dispersion of boron nitride (BN) nanofillers in an epoxy-based polymeric matrix and demonstrate their use as efficient heat-dissipating materials. Poly(4-vinylpyridine) (P4VP) is designed and added into the epoxy resin to produce in situ stabilizers during preparation of hexagonal BNs (h-BNs) and BN nanotubes (BNNTs) dispersion. In-depth experimental and theoretical studies indicated that the homogeneous distribution of BN nanofillers in epoxy composites achieved by using the in situ stabilizer enhanced the thermal conductivity of the composite by ∼27% at the same concentration of the BN nanofillers. In addition, the thermal conductivity of the h-BN/epoxy composite (∼3.3 W/mK) was dramatically improved by ∼48% (4.9 W/mK) when the homogeneously dispersed BNNTs (∼1.8 vol %) were added. The concept of the proposed in situ stabilizer can be further utilized to prepare the epoxy composites with the homogeneous distribution of BN nanofillers, which is critical for reproducible and position-independent composite properties.

Purification of Boron Nitride Nanotubes Enhances Biological Application Properties.

Commercially available boron nitride nanotubes (BNNTs) and their purified form (pBNNTs) were dispersed in aqueous solutions with various dispersants, and their cytotoxicity and drug encapsulation capacity were monitored. Our data suggest that pBNNTs showed an average increase in dispersibility of 37.3% in aqueous solution in the presence of 10 different dispersants. In addition, 100 µg of pBNNTs induced an average decrease in cytotoxicity of 27.4% compared to same amount of BNNTs in normal cell lines. The same amount of pBNNTs can encapsulate 10.4-fold more drug (camptothecin) compared to BNNTs. These data suggest that the purification of BNNTs improves several of their properties, which can be applied to biological experiments and are thus essential in the biological application of BNNTs.

Dual growth mode of boron nitride nanotubes in high temperature pressure laser ablation.

The morphological analysis of the end of boron nitride nanotubes (BNNTs) using high-resolution transmission electron microscopy (HR-TEM) can provide valuable insight into the growth mechanism in high temperature pressure (HTP) laser ablation where the best quality of BNNT materials can be obtained so far. Two growth modes of BNNT coexisting during the synthesis process have been proposed based on HR-TEM observation and length analysis. One is the root growth mode, in which boron nitride (BN) species formed via the surface interaction between surrounding N2 molecules and boron nanodroplets incorporate into the tubular structure. Another mode called open-end growth mode means the prolongation of tube growth from the exposed BN edge surrounding the surface of boron nanodroplets which is constructed by the heterogeneous nucleation of absorbed BN radicals from the gas plume. The statistical data, the proportions of end structures and the length of BNNTs, could be fitted to two growth modes, and the open-end growth mode is found to be especially effective in producing longer nanotubes with a higher growth rate. The scientific understanding of the growth mechanism is believed to provide the control for optimized production of BNNTs.

Selective Detection of Nitrogen-Containing Compound Gases.

N-containing gaseous compounds, such as trimethylamine (TMA), triethylamine (TEA), ammonia (NH3), nitrogen monoxide (NO), and nitrogen dioxide (NO2) exude irritating odors and are harmful to the human respiratory system at high concentrations. In this study, we investigated the sensing responses of five sensor materials-Al-doped ZnO (AZO) nanoparticles (NPs), Pt-loaded AZO NPs, a Pt-loaded WO3 (Pt-WO3) thin film, an Au-loaded WO3 (Au-WO3) thin film, and N-doped graphene-to the five aforementioned gases at a concentration of 10 parts per million (ppm). The ZnO- and WO3-based materials exhibited n-type semiconducting behavior, and their responses to tertiary amines were significantly higher than those of nitric oxides. The N-doped graphene exhibited p-type semiconducting behavior and responded only to nitric oxides. The Au- and Pt-WO3 thin films exhibited extremely high responses of approximately 100,000 for 10 ppm of triethylamine (TEA) and approximately -2700 for 10 ppm of NO2, respectively. These sensing responses are superior to those of previously reported sensors based on semiconducting metal oxides. On the basis of the sensing response results, we drew radar plots, which indicated that selective pattern recognition could be achieved by using the five sensing materials together. Thus, we demonstrated the possibility to distinguish each type of gas by applying the patterns to recognition techniques.

High-dose intraoperative remifentanil infusion increases early postoperative analgesic consumption: a prospective, randomized, double-blind controlled study.

PURPOSE: The purpose of this study was to determine whether intraoperative infusion of remifentanil induces acute tolerance to opioids, and compare the postoperative pain and opioid consumption by the effect site concentrations of remifentanil. METHODS: One hundred and ninety-eight patients undergoing gastrectomy were randomly assigned to maintain target effect site concentrations of remifentanil at 0 (Group 1, n = 39), 2 (Group 2, n = 40), 4 (Group 3, n = 39), 8 (Group 4, n = 40), or 12 ng/ml (Group 5, n = 40) during operation. Postoperative pain intensities and fentanyl requirement were recorded at postoperative 2, 6, 24, and 48 h. RESULTS: Fentanyl requirement for postoperative 2 h was significantly greater in Group 5 compared to Group 1 (376 ± 116 vs. 283 ± 129 µg, P = 0.03). However, there were no differences in fentanyl requirements among the groups after postoperative 2 h. Also, total fentanyl consumption for 48 h was similar in all groups (Group 1; 3106 ± 629, Group 2; 2970 ± 705, Group 3; 3017 ± 555, Group 4; 3151 ± 606, and Group 5; 2984 ± 443 µg, P = 0.717). Pain scores at rest and during deep breathing were comparable in all groups at the time of each examination. CONCLUSION: Intraoperative infusion of remifentanil with 12 ng/ml of effect site concentration in patients undergoing gastrectomy increases early postoperative fentanyl requirement. Acute opioid tolerance would be developed by higher concentration of remifentanil than dosage of common anesthetic practice.